Tel: 13556601560     E-mail:

China Courage Magnet Manufacturer

14 Years High Performance Permanent Magnet Supplier & Factory



Can the hall sensor be oriented sideways towards the magnets?

Have magnet related questions, welcome to the Courage magnet FAQ section to find answers, aggregating nearly 100 magnet questions article posts, today to talk about magnet related topics is Hall sensor side to magnet can? Scroll down.

Can the hall sensor be oriented sideways towards the magnets?

Yes, it is possible. The Hall sensor is a type of sensor used to detect magnetic fields. It can measure the strength and direction of the magnetic field near it. When positioned sideways towards a magnet, the Hall sensor can still sense the magnetic field's influence and generate a corresponding electrical signal output. However, the sensor's sensitivity and output may be affected by the sideways orientation. This is because the active area of the sensor is typically on its front face, and the angle between the sideways orientation and the magnetic field lines is larger. Therefore, when detecting from the side, the sensitivity of the sensor might be reduced, leading to weaker output signals. If you require more accurate measurements, it's recommended to place the magnet within the sensor's active area, which is typically the front face of the sensor, to ensure optimal measurement results.

Hall sensors can be fitted with a variety of materials and specifications of magnets, the figure below shows neodymium round magnets.


How far apart is the Hall sensor side to side with the magnet magnet?

Hall sensor and magnet spacing is related to the magnet strength, a strong magnet may cause significant sensor output changes over a longer distance, while a weaker magnet may require a closer distance to produce a detectable effect.

The above is the answer to the question of whether Hall sensors can be flanked by magnets, our company is a professional supplier of motor/sensor magnets, if you need samples, to understand the price of bulk purchase please call or contact us online.

More related articles are recommended;

Mounting angle of the Hall sensor which need install on the 10 pole

Which side of the magnet should be induced by the Hall sensor?

Prev: Why are wet press molded ferrites better for magnetic properties?

Next: Do stepper motors require magnets? What is their role and material?