This product is a high-strength and strong magnetic rod, with a rare earth permanent magnet as the magnetic source. The surface is wrapped in stainless steel pipes, and both ends are welded and sealed. By utilizing its powerful magnetic force, small ferromagnetic impurities can be sorted out from various powders, particles, and slurries, thereby improving material purity, product quality, and protecting downstream equipment. The magnetic rod can be separately fixed at the inlet, outlet, or conveying pipeline, and can also be used to make complete sets of magnetic grids, drawer type iron removers, fluid iron removers, and rotary iron removers.
In addition to ferromagnetic bar specifications and Gauss technical parameters;
Magnetic Grade 1 / Gauss
|Magnetic Grade 2 / Gauss||9000||10000||10000||11000||11000||12000||11000||11000||12000||12000|
|Magnetic Grade 3 / Gauss||10000||11000||11000||12000||12000||13000||12000||12000||13000||13000|
Note: The magnetic rod with magnetic force level 3 in the above table requires a length of ≥ 150mm.
In order to achieve a better iron effect, it can also be made into a multi-layer, multi-root form, up to 12000 Gauss or more!
Maintenance of magnetic rods;
It is not recommended to place the magnetic rod in an environment higher than the rated working temperature during use, as high temperatures can cause a decrease in magnetic force; Try to avoid damage to the stainless steel on the surface of the magnetic rod. Once the stainless steel on the surface is damaged, the internal magnet may come into contact with water and air, which can cause the magnet to oxidize and even be scrapped