DongGuan Courage Magnetoelectric Technology Co.,Ltd

Industry news

Introduction of NdFeB magnet slicing, wire cutting, surface grinding, chamfering, etc.

The slicing, wire cutting, surface grinding, forming grinding, ultrasonic drilling, chamfering, etc. of NdFeB magnets are all mechanical processing. Today, let's make a popular science on these operating procedures to satisfy your curiosity.

The large blank is processed into small pieces, and only the plane is processed, which is completed by a slicer.

Wire cutting
Machining large blanks into small pieces is mainly used to process curved surfaces and planes with a relatively large area, as well as special-shaped magnets.
Surface grinding
Grind the surface of the magnet to improve the dimensional accuracy.

Forming mill
Surfaces that require high machining accuracy.

Ultrasonic drilling
For some customers who require relatively small holes, ultrasonic drilling is required.

Sleeve hole
Machining a hole with a relatively large diameter.

The sharp corners of the magnet are processed into rounded corners, generally 0.1, 0.2, the main purpose is to facilitate electroplating, not to hurt your hands, install and use.

More introduction to magnet processing;
How do magnets slice? Detailed Explanation of Slicing Processing of Magnets
Two processing methods of Nd-Fe-B magnet are briefly introduced
Deep processing technological process of sintered ndfeb magnet


Contact: Emily Feng

Phone: 135-5660-1560

Tel: 0769-23388351/2


Add: No. 1, Longtong Road, Xinhe Community, Wanjiang District, Dongguan City, Guangdong Province, China

Top Contact us Tail