Introduction to the principle of drawer type iron remover
The drawer type iron remover is composed of high-performance magnetic rod and stainless steel tube. The magnetic field of the magnetic rod is strong, which can reach 12000gs. The drawer type iron remover is mainly used to sort the small iron impurities in powder and small granular materials. A plurality of magnetic grilles are placed inside the drawer type iron remover box, and the magnetic bars of the upper and lower grilles are staggered. This design avoids the escape of iron scraps from the magnetic field blind area, so that the materials through the drawer type iron remover can fully contact the surface of the magnetic bar, and more effectively sort out the small iron impurity pollutants in the materials. Drawer type iron remover is widely used in food, food additive, pharmaceutical, feed, fine chemical industry, lithium battery, pigment, carbon black, plastic and other industries.
Optional features of drawer type iron remover: surface treatment of drawer type iron remover: mirror polishing, wire drawing polishing, sand blasting; shell material: SS304, SS316; magnetic strength of magnetic rod of drawer type iron remover: 3000gs, 8000gs, 10000gs, 12000gs; working temperature of drawer type iron remover ＜: 80 ℃, 100 ℃, 120 ℃, 150 ℃; connection mode of drawer type iron remover: flange, fast Quick clamp joint, soft connection crimping, straight pipe; cleaning method of drawer type iron remover: conventional type, easy to clean casing type; accessories of drawer type iron remover can be selected: material flow regulating valve, equipment support, cleaning and replacement of magnetic grid.
How to clean the drawer type iron remover?
The cleaning frequency of the drawer type iron remover: it is determined according to the content of iron impurities in the materials to be treated and the handling capacity of materials per hour and other parameters. Generally, the thickness of the powdered iron impurities adsorbed on the surface of the magnetic rod should not be more than 10 mm, and it should be cleaned regularly and timely to maintain good use effect.
Cleaning steps of drawer type iron remover: when cleaning the drawer type iron remover, first remove the magnetic grille in turn, clean the iron impurities adsorbed on the surface of the magnetic rod, and then install the magnetic grille in the box in turn, and fix it in place to avoid leakage of materials through the gap due to poor sealing. When cleaning the iron impurities on the surface of the magnetic rod, thick cotton gloves, rags, pallets and other tools can be used. If necessary, water can be used for cleaning.