Introduction to the Production Cycle and Time-consuming of Ring Magnets
Many customers will ask a question before placing an order for circular ring magnet, that is, how many days will it take for you to make the delivery of large goods? Below small make up to introduce the ring magnet production cycle and time-consuming process.
How long does it take to produce circular ring magnets?
First of all, it takes at least 1 day to prepare materials, purchase raw materials and check whether they are qualified.
The second is drilling. The blank that passes the inspection shall be punched into the inner hole with a punching machine. The process of metal drilling is slow, which takes 2 days. If it is countersunk head hole, then there is a procedure, is to first straight hole and then countersunk hole.
The third is slicing. Place the blank into the slicer after drilling. Ten thousand magnets will take five days without a rush.
The fourth is chamfering. Cut the black pieces into the chamfering machine chamfering (chamfering Angle cannot be electroplated, or the plating surface is easy to fall off). It takes one day
The fifth is electroplating. It was sent to the electroplating factory for electroplating, which took 2 days.
The sixth is magnetization and packaging. A day or so.
It takes 10 to 12 days for a normal magnet, 12 to 15 days for a round magnet, and 10 to 12 days for a square magnet, which takes three cuts to make.
I believe that you have a certain understanding of the production cycle of the ring magnet after reading. If you are a purchasing friend, I hope the delivery date is not too tight and give us a delivery date acceptable to both sides.