N50 magnet is a high-grade neodymium magnet, which has very high magnetic energy product and good magnetic properties. Its magnetic energy product is more than 10 times that of ordinary ferrite. It is mainly used in occasions requiring high magnetism, such as motors and generators, magnetic therapy, magnetic separation, mechanical equipment, industry, etc. Today we will mainly introduce its Gauss strength and pull force.

What is the magnetic field strength of N50 rare earth Neodymium magnet?

The surface magnetic field strength of N50 rare earth neodymium magnets can usually reach more than 4000 Gauss, and more than 5000 Gauss is no problem, which is a relatively high magnetic field strength, making N50 magnets have strong magnetic properties in a variety of applications. However, the exact value of the magnetic field strength is also affected by the specific magnet size, shape and magnetization method. Therefore, the specific N50 magnet magnetic field strength may vary, but in general, it is usually within the above range.

N50 grade magnet pull and Gauss relationship?

There is no direct relationship between the pull of the N50 magnet and the strength of the magnetic field (Gauss). Pull refers to the attraction or traction that a magnet can produce, and it depends on factors such as the geometry, size and direction of magnetization of the magnet, rather than just the strength of the magnetic field.

Although there is no direct relationship between tension and gauss, in general, tension usually increases with the strength of the magnetic field. When the strength of the magnetic field increases, the attraction of the magnet to other magnetic materials (such as iron, steel, etc.) will also increase, resulting in greater pulling force.

However, it is important to note that the pull is not only affected by the strength of the magnetic field, but also by the design of the magnet and the properties of the material. For example, the shape, size and magnetization of the magnet all have an effect on the pull. Therefore, to determine the pull of a specific N50 magnet, you need to consider several factors and perform actual tests or use the relevant magnetometer tool to measure.

The following N50 grade neodymium magnet gauss and tension values are for reference only;

N50 square magnet 5x5x1.2mm surface magnetic card height is about 2300 Gauss, vertical pull is about 0.39kg

N50 grade circular magnet 15x2mm center magnetic 1675 gauss, the highest table magnetic 3100 gauss, pulling force of about 2.1kg

n50 grade 3mm diameter 2mm thickness round magnet table magnetic about 3800 Gauss, pull about 0.25kg

n50 Performance 6mmx1mm round neodymium magnet surface about 1500 Gauss, pull about 0.36kg

N50 grade thin oblate magnet 10x0.5mm surface magnetic strength is less than 1000 Gauss, tension is about 0.3kg

N50 square strong magnet 10x10x5mm, surface magnetic strength of about 4300 Gauss, vertical pull of about 4kg

N50 ring neodymium magnet 20x10x3mm surface magnetic about 2900 Gauss, vertical pull about 1.8kg

The above is about the Gauss strength and pull of N50 grade rare earth neodymium magnet. Our company has great advantages for the processing of this high-performance grade neodymium magnet. We can produce any shape you want.

Articles with similar content;

How many gauss is n50 grade of sintered neodymium magnet strength?