N35 magnet is a grade of neodymium magnet commonly used by customers. Its magnetic force can meet the requirements of most customers, and the price is not too expensive, so it is used in various industries. A lot of people want to know what is the tension of the N35 magnet? I'd like to share with you today.

N35 is just one of the performance grades of NdFeB. Magnet manufacturers can make N35 magnets of various shapes and sizes according to the requirements of customers, so there is no fixed value for the pull force. Next, small editors will list some commonly used N35 magnet specification pull data, which can be referred to.

**What is the pull of N35 neodymium magnet?**

N35 is just one of the performance grades of NdFeB. Magnet manufacturers can make N35 magnets of various shapes and sizes according to the requirements of customers, so there is no fixed value for the pull force. Next, small editors will list some commonly used N35 magnet specification pull data, which can be referred to.

The pull force of round neodymium magnet with diameter of 20 mm and thickness of 3 mm is about 3.6kg.

The pull force of circular neodymium magnet with diameter of 20 mm and thickness of 2 mm is about 2.3kg.

The pull force of circular neodymium magnet with diameter of 18mm and thickness of 3mm is about 2.7kg.

The pull force of circular neodymium magnet with diameter of 18mm and thickness of 3mm is about 2.7kg.

The pull force of circular neodymium magnet with diameter of 15mm and thickness of 4mm is about 2.8kg.

The pull force of circular neodymium magnet with diameter of 15mm and thickness of 1.5mm is about 1.6kg.

The pull force of circular neodymium magnet with diameter of 12mm and thickness of 1mm is about 0.6kg.

The pull force of round neodymium magnet with diameter of 10 mm and thickness of 4 mm is about 1.9 kg.

The pull force of round neodymium magnet with diameter of 10 mm and thickness of 3 mm is about 1.5 kg.

The pull force of circular neodymium magnet with diameter of 5mm and thickness of 5mm is about 0.76kg.

The tensile force of round NdFeB with diameter of 5mm and thickness of 3mm is about 0.48kg.

The pulling force of round neodymium magnet with diameter of 3mm and thickness of 4mm is about 0.25kg.

The pull force of round neodymium magnet with diameter of 3mm and thickness of 1mm is about 0.13kg.

The pull force of round nd magnet with diameter of 2mm and thickness of 2mm is about 0.13kg.

The tensile force of cube magnet with length of 3mm, width of 3mm and thickness of 3mm is about 0.28kg.

The pulling force of rectangular magnet with length of 10 mm, width of 4 mm and thickness of 1.5 mm is about 0.6kg.

The pulling force of square neodymium magnet with length of 20 mm, width of 10 mm and thickness of 1.5 mm is about 2kg.

The pulling force of square neodymium magnet with length of 20mm, width of 6mm and thickness of 1.5mm is about 1.1kg.

The pulling force of square neodymium magnet with length of 25mm, width of 8mm and thickness of 2mm is about 2.1kg.

The pulling force of rectangular magnet with length of 40mm, width of 12mm and thickness of 10 mm is about 13.9kg.

The pulling force of rectangular magnet with length of 50mm, width of 10mm and thickness of 1.5mm is about 3.6kg.

The square magnet with length of 50mm, width of 50mm and thickness of 255mm has a tensile force of more than 100kg.

Note: the above tension is not vertical tension, the data is only for reference, The tensile force tested in different environments is also different, including the thickness of iron plate, tensile speed, stress direction, etc.

You can also use this pull calculator: https://www.dgcourage.com/about/pull-force/

NdfeB strong magnetic pull sketch map

Reference for the value of NdFeB strong magnetic pull (suction) of 50mm specification

How much weight can a n35 magnet hold?

Contact: Emily Feng

Phone: 135-5660-1560

Tel: 0769-23388351/2

Email: salesd@dgcourage.com

Add: No. 1, Longtong Road, Xinhe Community, Wanjiang District, Dongguan City, Guangdong Province, China